差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

两侧同时换到之前的修订记录 前一修订版
quadraturedecoder_verilog [2020/08/08 17:45]
gongyu 		quadraturedecoder_verilog [2020/08/08 17:46] (当前版本)
gongyu
行 8: 行 8:
  
 #### 正交解码 #### 正交解码
 +
 <code verilog> <code verilog>
 module quad(clk, quadA, quadB, count); module quad(clk, quadA, quadB, count);
行 32: 行 33:
 </​code>​ </​code>​
 #### 实际的电路 #### 实际的电路
 +<code verilog>
 +module quad(clk, quadA, quadB, count);
 +input clk, quadA, quadB;
 +output [7:0] count;
 +
 +reg [2:0] quadA_delayed,​ quadB_delayed;​
 +always @(posedge clk) quadA_delayed <= {quadA_delayed[1:​0],​ quadA};
 +always @(posedge clk) quadB_delayed <= {quadB_delayed[1:​0],​ quadB};
 +
 +wire count_enable = quadA_delayed[1] ^ quadA_delayed[2] ^ quadB_delayed[1] ^ quadB_delayed[2];​
 +wire count_direction = quadA_delayed[1] ^ quadB_delayed[2];​
 +
 +reg [7:0] count;
 +always @(posedge clk)
 +begin
 +  if(count_enable)
 +  begin
 +    if(count_direction) count<​=count+1;​ else count<​=count-1;​
 +  end
 +end
 +
 +endmodule
 +</​code>​
  
 #### 参考阅读 #### 参考阅读