**这是本文档旧的修订版！**

< C code>

include "M10PWM.h"

include "M10SevenSeg.h"

define LCD_CSR_CMD 0

define LCD_CSR_DAT 1

define LCD_CSR_RST 2

static void lcdwritecmd (uint8t data) reentrant { LCDCSR = LCDCSRCMD; LCDDATA = data; nopdelay (5); while(LCDCSR == 0); } static void lcdwritedat (uint8t data) reentrant { LCDCSR = LCDCSRDAT; LCDDATA = data; nopdelay (5); while(LCDCSR == 0); } static void lcdreset () reentrant { LCDCSR = LCDCSRRST; delay(50); LCDCSR = 0; delay(50); } static void lcdinit() reentrant { lcdreset();
lcdwrite_cmd (0x11); delay(50); lcdwritecmd(0xB1); lcdwritedat(0x05); lcdwritedat(0x3C); lcdwritedat(0x3C); lcdwritecmd(0xB2); lcdwritedat(0x05); lcdwritedat(0x3C); lcdwritedat(0x3C); lcdwritecmd(0xB3); lcdwritedat(0x05); lcdwritedat(0x3C); lcdwritedat(0x3C); lcdwritedat(0x05); lcdwritedat(0x3C); lcdwritedat(0x3C);
lcdwritecmd(0xB4); Column inversion lcdwritedat(0x03);
lcdwritecmd(0xC0); lcdwritedat(0x28); lcdwritedat(0x08); lcdwritedat(0x04);
lcdwritecmd(0xC1); lcdwritedat(0xC0); lcdwritecmd(0xC2); lcdwritedat(0x0D); lcdwritedat(0x00); lcdwritecmd(0xC3); lcdwritedat(0x8D); lcdwritedat(0x2A);
lcdwritecmd(0xC4); lcdwritedat(0x8D); lcdwritedat(0xEE);
lcdwritecmd(0xC5); VCOM lcdwritedat(0x1A);
lcdwritecmd(0x36); MX, MY, RGB mode lcdwritedat(0xC0); lcdwritecmd(0xe0); lcdwritedat(0x04); lcdwritedat(0x22); lcdwritedat(0x07); lcdwritedat(0x0a); lcdwritedat(0x2e); lcdwritedat(0x30); lcdwritedat(0x25); lcdwritedat(0x2a); lcdwritedat(0x28); lcdwritedat(0x26); lcdwritedat(0x2e); lcdwritedat(0x3a); lcdwritedat(0x00);
lcdwritedat(0x01); lcdwritedat(0x03); lcdwritedat(0x13); lcdwritecmd(0xe1); lcdwritedat(0x04); lcdwritedat(0x16); lcdwritedat(0x06); lcdwritedat(0x0d); lcdwritedat(0x2d); lcdwritedat(0x26); lcdwritedat(0x23); lcdwritedat(0x27); lcdwritedat(0x27); lcdwritedat(0x25); lcdwritedat(0x2d); lcdwritedat(0x3b); lcdwritedat(0x00); lcdwritedat(0x01); lcdwritedat(0x04); lcdwritedat(0x13);

lcdwritecmd(0x3a); lcdwritedat(0x06); lcdwritecmd(0x29);
} void lcdSetRegion(uint8t xstart,uint8t ystart,uint8t xend,uint8t yend) reentrant {
lcdwritecmd(0x2a); lcdwritedat(0x0); lcdwritedat(xstart); lcdwritedat(0x0); lcdwritedat(xend); lcdwritecmd(0x2b); lcdwritedat(0x0); lcdwritedat(ystart); lcdwritedat(0x0); lcdwritedat(yend); lcdwritecmd(0x2c); } void lcdwrite16bit(uint16t Data) reentrant { uint8_t t; t = (Data»8) & 0xff; lcdwritedat(t); t = Data & 0xff; lcdwritedat(t);

} uint8t flashbyteread (uint32t addr) { uint8_t t; t = (addr » 24) & 0xff; FLASHREADDATA = t;
t = (addr » 16) & 0xff; FLASHREADDATA = t;
t = (addr » 8) & 0xff; FLASHREADDATA = t;
t = addr & 0xff; FLASHREADDATA = t; nopdelay (10);
FLASHREADCSR = 0; nopdelay (10);
while(FLASHREADCSR == 0); t = FLASHREADDATA; return t;
} static void singlecolor() { uint8t i,j,k,t; const uint8t x = 128, y = 154; const uint8t xtotal = 132, ytotal = 162; uint32_t addr = 0x8000;
lcdSetRegion(0,0,xtotal-1,ytotal-1);
for (i = 0; i < xtotal; ++i) { for (j = 0; j < ytotal; ++j) { for (k = 0; k < 3; ++k) { lcdwritedat(0xff); } } }
lcdSetRegion1)

1) xtotal - x) » 1, (ytotal- y) » 1,x-1 +((xtotal - x) » 1),y-1 + ((ytotal- y) » 1));
for (i=0;i<x;i++) { for (j=0;j<y;j++) { lcdwrite16bit(0x00ff); lcdwrite_dat (0);
        for (k = 0; k < 3; ++k) {
          t = flash_byte_read (addr++);
          lcd_write_dat(t);
         // Serial.print (addr, HEX);
         // Serial.write ("   ");
         // Serial.println(t, HEX);
        }
    }
 }
} uint8t oldcount = 0; uint8t count = 0; uint32t big_count = 0; typedef struct {
  void (*init) () __reentrant;
  uint8_t (*dataAvailable)() __reentrant;
  uint8_t (*read) () __reentrant;
} PS2_STRUCT; extern const PS2_STRUCT PS2; —————————————————————————- ps2_init() Parameters: None
Return Value: 
  None
Remarks: call this function to init the PS2 module —————————————————————————- static void ps2init() reentrant { PS2CSR = 0; PS2DATA = 0;
} End of ps2_init() —————————————————————————- ps2dataavailable() Parameters: None
Return Value: 1 when there is data in the FIFO 0 when FIFO is empty Remarks: call this function to see if there is data in the receiving FIFO —————————————————————————- static uint8t ps2dataavailable() reentrant {
if (PS2CSR) { return 1; } else { return 0; } } End of ps2dataavailable() static uint8t ps2read() reentrant { uint8t t;
t = PS2DATA; PS2_CSR = 0;
return t; } End of ps2_read() const PS2STRUCT PS2 = { .init = ps2init, .dataAvailable = ps2dataavailable, .read = ps2_read }; typedef struct { void (reset) () reentrant; void (writeCMD)(uint8t) reentrant; void (*writeDAT) (uint8t) __reentrant; } LCDSTRUCT; const LCDSTRUCT LCD = { .reset = lcdreset, .writeCMD = lcdwritecmd, .writeDAT = lcdwritedat }; void setup() { uint8_t t, i; Serial.begin (115200); SEVEN_SEG.init(); ROTARY_ENCODER = 0x0; P3_DIRECTION = 0xFF; PS2.init(); PWM.resolution (0, 938); lcdinit(); singlecolor();
PWM.dutyCycle (0, 255, 0); Serial.write (“Hello world!”); } void loop() { uint8t t;
Serial.println (big_count++); oldcount = count; count = ROTARYENCODER; SEVEN_SEG.byteHex (count); if (old_count != count) { PWM.dutyCycle (0, count, 255-count); } P3 = (1 « (count » 5)) - 1; if (PS2.dataAvailable()) { t = PS2.read();
if (t == 0xF0) { Serial.print(t, HEX); } else { Serial.println(t, HEX); } } } </code>